How to Take Wall Tiles Down Without a Hammer
A Kiro / Shutterstock com
Because they are long-lasting and simple to clean, tiles are frequently selected as the material of choice for the walls in kitchens and bathrooms. However, signs of wear and tear or simply the passage of time could reveal themselves in the tiles at some point in the future. Therefore, remodeling is your best bet if you want to give a tiled room a new lease on life.
In any case, that is the topic that will be covered in this post, so continue reading in order to acquire knowledge on how to remove tiles from walls in an easy manner and without causing any significant damage to the surface that is underneath the tiles.
To get to the wall or the plasterboard and remove the tiles does not require an excessive amount of skill, but you should prepare yourself by exercising some patience. Be aware that in some cases, you may need to repair the wall afterward in order to achieve that smooth finish before retiling the surface with your brand-new tiles that look sleek and trendy.
Taking this into consideration, the amount of time and effort that you put into removing the tiles will directly correlate to the amount of time that you will save afterwards when it comes to preparing the wall.
The good news is that removing tiles from walls does not require a great deal of prior experience with do-it-yourself projects. You should be aware that the work that needs to be done may take one or two days, depending on the size of the project, and that these 24 hours may be messy. It ought to be sufficient to have the appropriate equipment and to be mentally ready in order to complete the task.
The following is a list of the equipment and supplies that you might require for the job:
- Eye protection devices
- Hard safety gloves
- Dust mask
- Pry Bar
- Blade scraper
- Or a tool for cutting grout
- Tile cutter
- Clippers and pliers for general use
- Tool, such as a screwdriver or chisel
- Knife for general use
- Large bin bag
- The use of a hot air gun is optional.
Think about protecting any nearby objects or surfaces, and cover any areas that shards of broken tiles could potentially cause damage to. The following preparation steps are necessary for removing tiles from either the kitchen or the bathroom, and they are the same regardless of where the tiles are located:
- If you remove the tiles from your bathroom, you should cover the bathtub as well as all of the porcelain fittings and fixtures.
- In the kitchen, remove all of the movable and lightweight furniture and place it outside of the space. Then, protect the countertops, the shelves, and any bulky appliances with a strong material such as cardboard or bubble wrap.
- Dust and other small particles can easily make their way into the plumbing system, so it is important to protect any drains and sink holes (in both the kitchen and the bathroom) from becoming clogged.
- It is important to remember to protect the flooring as well, whether it is laminate, natural stone, or hardwood. Simply place an old blanket or rug that you no longer use on top in order to add some additional cushioning in light of the fact that heavy tiles that shatter may cause damage to the surface.
- It is important to note that if your renovation project involves the removal of tiled splashback, then it is a good idea to turn off the power to any electrical sockets that are located on the wall. This is something that should be mentioned here. You wouldn't want to hurt yourself, would you? It's probably the last thing on your mind.
So, you've gotten your workspace ready to go, right? Now prepare your protective equipment Put on protective gear such as sturdy work gloves to guard against accidental cuts, knee pads, goggles, and a mask to ward off the dust that will unavoidably fly around the area.
The process of removing tiles from a wall is not easy, so it is imperative that you wear protective gear at all times. If you suffer from respiratory conditions such as asthma or allergies, you might want to reconsider removing the tiles on your own and instead consider hiring a professional instead. You should always put your own safety and well-being ahead of everything else.
Instead, you should hire a qualified handyman.
Our handyman services can be reserved in the cities of Melbourne, Sydney, Brisbane, and Perth.
(Step-by-step) Instructions on How to Remove Wall Tiles
In a nutshell, the entire process can be broken down into three steps: first, the grout, then the tiles, and finally, the adhesive.
Then, shall we get down to business, if you don't mind?
1. Take out the tile grout.
The removal of the grout will probably be the part of the job that takes the most time, but if you do it correctly, it will save you the arduous effort of breaking the tiles apart piece by piece later on. To ease the removal of the grout, you can use either a heat gun or a blow dryer.
Then, scrape it away with a utility knife, making sure to remove it all the way to the wall, and finally, throw it away. By doing so, you will be able to separate each tile, allowing you to remove them more easily and without causing any additional damage to the wall. You need to get things done as quickly as you can if you want to leave the wall behind you looking nice and even.
A helpful hint is that you don't have to remove the entire line of grout; you just need to remove enough of it so that the spacer lugs can be seen. The more effectively you carry out the tasks at hand, the more manageable they will appear.
2. Take the tiling off the walls and discard it.
Start by tapping the corners of a few tiles on the wall to locate any loose edges. If you are tiling an entire wall, do this. This will serve as your point of departure. Then, move the chisel behind the tile, and use the hammer to give it a light tap in order to apply pressure and get the tile to separate from the adhesive. This way, you can disassemble them without risking breaking any of them.
In most cases, the first tile is the most challenging to remove; however, once all of the tiles have been removed, the exposed edges of the remaining tiles will make the remaining work much simpler. Note that the aforementioned guidelines will assist you in removing tiles from the plasterboard without the risk of breaking any of the tiles.
A helpful hint is to enlist the assistance of another person who is outfitted with thick gloves to assist you in catching the tiles as they fall, so that you can reuse them in the future. You will save money and cut down on waste by repairing and reusing the items that are broken in your home.
3. Crack the tiling into pieces
In the unfortunate scenario in which the tiles are directly set into the mortar, you will be required to break them up into smaller pieces. Put on a face shield to protect your eyes, as porcelain tiles can shatter into extremely jagged pieces. In order to minimize the amount of broken tile, you should use a chisel and a hammer to break the tiles on the side. Carry out your labor in horizontal lines.
4. Remove the adhesive and any traces that may be present.
It might appear to be an impossible task, but you can remove the remnants of the adhesive and grout from the wall by using a tile cutter, a utility knife, or a cold chisel. In preparation for the installation of the new tiles, you should check to see that the wall or the plasterboard is level and even. Additionally, use some utility clippers or pliers to snip off the spacer lugs.
It's possible that the entire procedure will appear intimidating and risky to you. However, if you are unsure that you can complete the job by yourself and achieve the desired result, it is in your best interest to involve professionals so that you can save time.
Why not trust the professionals at Fantastic Handyman with the task at hand?
Our handyman services can be reserved in the cities of Melbourne, Sydney, Brisbane, and Perth.
- When deciding to remove tiles from walls yourself, the do-it-yourself method requires preparation, both mentally and in terms of the tools used.
- You will need a chisel, a hammer, and some protective clothing in order to remove the old, unsightly tiles from the walls of your bathroom or kitchen.
- Never discount the significance of protective gear, and give yourself plenty of time to finish the task without becoming an anxious wreck.
- And if you're not confident in your ability to retile your newly prepared wall, you can always hire a professional to do it for you so that you can take pleasure in the updated appearance of your home.
Attention to all NSW residents! Your NSW Government-provided $25 Dine and Discover vouchers will expire on June 30. We suggest using your remaining Dine vouchers to indulge in a luxurious lunch, but redeeming the Discover vouchers can be a bit tricky. Fret not, we have compiled a list of Sydney and
Every product we present goes through a comprehensive curation process by our editors and experts. We may earn a commission from your purchases.The inescapable truth is that in the life of tile floors, baths, showers, and other tile-covered spaces, chips or cracks will occur.Perhaps a heavy object fell
Barry Hall has been termed a "bully" by Sonny Bill Williams, who has promised to shut him down ahead of their fight in Sydney next Wednesday. Both former footballers are accomplished boxers, with Williams having been a New Zealand heavyweight champion while Hall has won junior Golden Gloves
The Squad's new gang of misfit anti-heroes should not be held too dear: all are fair game in this rousing blend of humor and violence. Reviews have been overwhelmingly positive, cementing fan hopes that this DC Comics reboot would deliver the explosive mix of laughter and cartoon mayhem they were hoping